WE ARE OPEN SATURDAYS & WE SHIP!
EMX INDUSTRIES, INC.
Vehicle Motion Detectors
Single Piece - Free Exit Probe Detector
The VMD202 is the most advanced single-piece vehicle motion detector on the market today. The probe and its electronics are housed in a slim design that is buried next to a driveway.
The optional VMD202-R sensitivity remote makes installation and fine tuning simple. Program the VMD202 vehicle motion detector’s 10 sensitivity settings with the VMD202-R and the setting is retained in non-volatile memory. Then the VMD202-R can be removed and used for multiple installations, or left in place if tampering is not a concern.
Vehicle Motion Detectors
Two Piece - Free Exit Probe Detector
The CarSense 101 vehicle motion detector consists of a control module with a standard 11-pin connector and a sensing probe that is easily installed along a roadway. The CS101 can be seamlessly integrated with security control boards, gate and door operators.
Ultrasonic Vehicle Detector
TPA Technology
.jpeg/:/cr=t:0%25,l:0%25,w:100%25,h:100%25/rs=w:360,cg:true)
The USVD-4X drive thru vehicle detector uses Triangular Planar Array (TPA) technology to detect the presence of a vehicle. The USVD-4X ultrasonic vehicle detector handles any drive thru operation, including fast food, banking, pharmacies, car washes and parking.
For these types of applications, the USVD-4X is much less expensive than traditional vehicle loop detectors, which require the installation of a loop in pavement. The USVD-4X ultrasonic vehicle detector is simply mounted on a post.
Microwave Vehicle Detector
Microwave Motion Detector
A vehicle motion sensor that uses microwave technology to activate automatic doors and industrial gates. The sensor distinguishes between vehicles and pedestrians through dual relay outputs. Featuring multiple detection modes, the sensor can be programmed to approach-only, depart-only or bidirectional movement. Programming can be done using the push buttons directly on the housing or by the optional remote control.
The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates. Featuring two configurable outputs, vehicle motion detection as well as presence detection, the OWL activation sensor will ensure the safety of people and goods.
The remote control enables flexible set-up of the presence detection area, direction detection, hold time, and more.
Wireless Edge Link Sensor
Compatible with NC, 10K and pulse monitored outputs
The WEL-200 system provides a complete wireless solution for interfacing sensing edges with gate and door operators. This wireless edge link eliminates the wiring between the safety edge and operator control box while ensuring compliance with 2018 UL325 monitoring standards. The WEL-200 operates up to 200 feet line of sight between transmitter and receiver. The receiver connects with up to four transmitters with separate relay and pulse outputs for open and close edge functionality.
This Page is Under Construction, many more products to be added soon!